{"ok":true,"content":"Hi Dieter,<br><br> As a rule, the rescue operation works very well and reliably.<br> Otherwise, one wouldn&#39;t dare to offer and sell it.<br><br> But \u2013 that&#39;s right \u2013 it can only work with what it has. If the carrier, the platform (by which I mean the helicopter), offers sufficiently good working conditions, then everything is fine. It takes quite a lot to throw the sensors off.<br><br> But if anything is wrong (often constructive, sometimes model-making), the whole thing can quickly go wrong. Figuratively speaking, just like in reality.<br><br> Besides the helicopter, it&#39;s also possible that the NEO itself is faulty, for example, that the casing doesn&#39;t close properly anymore or can move around inside. You wouldn&#39;t believe some of the things that get sent in, things held together only by superglue, tape, and a lot of optimism :-) But that&#39;s not meant to be an accusation.<br> Very, very rare, but it does happen: faulty sensors. In that case, after a few minutes on the ground, you would already see in rescue mode that the marker is moving off-center, and when you deploy the rescue system, the helicopter would then tip over. This would happen without the helicopter even having been flown or moved.<br><br> Unfortunately, I have no personal experience with any of the three helicopters, but I would be curious to see what the extended vibration analysis of VBar Control Touch reveals, and how other installation positions or other factors might affect it.<br><br> \u2014Eddi<br><br> Born to fly ...<br> forced to work.","note":"machine-translated from German"}