{"ok":true,"content":"Hi Eddi,<br><br> It might be hard to see, but the cables are secured to the side panel, where the cable protection is, using cable ties. Moving them closer to the stabilizer bar wouldn&#39;t help, as that would just transmit even more vibrations from the chassis.<br><br> I have no idea who G**I is? But placing the stabilizer directly above the vibration-prone rear output shaft and right behind the main gear doesn&#39;t seem much better to me either. Since that would involve a lot of modification work (I&#39;d have to build some sort of reasonably level platform out of balsa and plywood and reroute the cables), I&#39;d ask you to give me a contact who has already done such a modification and it resulted in an improvement; otherwise, it&#39;s more of a philosophical discussion.<br><br> The behavior is identical for the TDF and T-Rex, so swapping them won&#39;t help in my case.<br><br> The Chronos is certainly <strong>the<\/strong> reference model when it comes to vibrations in the sport models, hardly any entries regarding vibrations (everything green), plus a 6kg takeoff weight, lots of CFRP and aluminum, so if the VBar can&#39;t cope with that, then at least it&#39;s not the helicopter&#39;s fault.<br><br> We already discussed Vbar earlier; using Vbar and Jeti together is unfortunately too risky. And since I fly Mode 1 and with a tray, it&#39;s impossible to find someone who has a compatible transmitter.<br><br> Best regards<br> Dieter","note":"machine-translated from German"}