{"ok":true,"content":"Hi Dieter,<br><br> Regarding the photo: yes, that&#39;s how I would try it. But of course, the cables should be properly secured without any tension :-) , so they can&#39;t cause any further problems.<br><br> To be honest, with the Rex I&#39;m &#39;dissatisfied with the overall situation&#39;, to paraphrase Bully Herbig \u2013 it&#39;s simply nonsense (please excuse my wet pronunciation :-), to cram the FBL and receiver into such a position. G**I also has such tendencies... I don&#39;t know where or with what they&#39;ve spent the last 20 years of electric model flying :-\/<br><br> A cross-check makes sense to me mainly when I perform it between a known OK model and a problem model (or between two such VBar models).<br><br> If, for example, I were to swap between the TDF and the Rex in your case, the result would be Z-axis entries or horizon tilting (in both cases), and the conclusion would be -&gt; VBar, or both VBars or VBar in general, because both do the same thing on both.<br><br> Chronos rarely appear on my radar, so I don&#39;t have a sense of whether they are generally calmer or more susceptible; this could either mean that there aren&#39;t as many of them compared to the &#39;big players&#39;, or that they are actually less susceptible or not susceptible at all.<br><br> It would probably be better if the TDF didn&#39;t cause any more problems, then a comparison test could be done between the two.<br><br> The best way to see\/detect it would be to use a VBar Control Touch with advanced vibration analysis to view and log the continuous G-loads (noise) on the sensors \u2013 do you know anyone who could connect an RX-Sat to your NEO via AUX2\/3 for a test flight?\r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}