{"ok":true,"content":"Hi everyone,<br><br> I am currently flying a T-Rex 470L with a Spektrum DX6. The main components used are a Hobbywing 60A Platinum V4, the VBar Neo, two Spektrum satellite receivers, and an acoustic LiPo monitoring system.<br> I&#39;m planning to buy a larger helicopter soon and would like to delve deeper into telemetry. I&#39;ll be using a Vstabi neo again. The goal is to transmit the telemetry data generated by the ESC (I think it will be a YGE) to the transmitter. I&#39;m aware that I&#39;ll need to use Texy with the YGE ESC for this.<br><br> Now I&#39;m facing a real puzzle, at least for me, and I&#39;m doubting whether this plan is even feasible with my Spektrum setup. :-) Theoretically, I thought I could simply connect a telemetry-capable Spektrum receiver to the Vstabi instead of the satellites, in order to connect the telemetry output from the YGE ESC directly to the receiver. I don&#39;t think directly routing the data through the Vstabi is possible. However, my research has already revealed indications that the Vstabi can only be effectively used with the Spektrum satellites. This would mean my idea with the telemetry-capable receiver would be pointless. Does anyone have any ideas on how I could get the telemetry data from the YGE ESC to the transmitter, or perhaps even fly a similar setup?<br> First off: Using the SPM4649T or SPM4651T as a telemetry solution is not my primary goal right now. My main objective is to use the telemetry data generated by the controller itself.<br><br> I would be grateful if someone could help me.<br> Best regards<br><br><br><br> Edited once. Last edited on June 27, 2020 at 11:09 PM by Mortalis.","note":"machine-translated from German"}