{"ok":true,"content":"Thanks for the help.<br><br> So I choose a tail servo that has the same parameters as my mks hv9780.<br> Now I have a problem: the roll setting on the transmitter is reversed. Otherwise, everything seems to be working fine. What&#39;s the best way to change this? I want to reverse the roll direction in the transmitter&#39;s adjustment settings. (What I find strange is that according to the transmitter&#39;s adjustment settings, I only have roll inverted, but in the servo settings, pitch is inverted for some inexplicable reason.)<br><br> According to the instructions, the ESC should be connected to the ESC, and I did that, plugging the ESC&#39;s BEC cable in there. Is that correct? And where should the ESC&#39;s throttle signal cable be connected? The ESC manual says the VBar Neo has an input called RX-B, but I can&#39;t find anything about it.<br> I&#39;ve now plugged the BEC into aux 2 and plan to plug the throttle cable into the ESC; will that be a better fit?<br><br><br><br> Edited 5 times. Last edited on 09\/10\/2021 at 19:55 by alugaga.","note":"machine-translated from German"}