{"ok":true,"content":"Hello,<br> I&#39;m using a Vstabi Neo Pro Rescue with my new 1:5 scale Bell 430 with a 4-blade Vario rotor head. The swashplate linkage to the rotor head is 45 degrees and leading, so there&#39;s no mechanical 90-degree compensation. Normally, I would have to program a virtual 45-degree swashplate rotation in the Neo, but this resulted in the blade above the tail boom not moving at all during roll to the right or left; instead, the blade moved perpendicular to the longitudinal axis. So, exactly the wrong thing to do. Without the swashplate rotation, everything works as it should, which is a bit confusing.<br> An Axon that had been used shortly before still had to be symbolically programmed with a twist in the setup. This is no longer necessary with the Neo.<br> As I said, everything is working correctly now and the reactions are coming as they should.<br> I just want to understand why I don&#39;t have to program a rotation on the Neo; at least the symbol in the Neo&#39;s setup regarding the swashplate pivot points isn&#39;t rotated by 45 degrees, but is perfectly normal and axis-symmetrical.<br><br> Perhaps someone can explain this to me, or maybe I&#39;ve programmed something incorrectly. This is my first FBL (flybarless) model. I used to fly with a flywheel gyro and I&#39;m not very familiar with FBL technology.<br> Thank you for your help.<br> Best regards<br> G\u00fcnter","note":"machine-translated from German"}