{"ok":true,"content":"Quote: I entered 3 linear gas curves with 65\/70\/ and 75% in the transmitter.<br><br> Why? - If the ESCs are connected to each other in the NEO, the throttle percentages are set in the PC for each bank. I&#39;m assuming the Castle controller mode for this percentage calculation. So, for banks 1\/2\/23, enter the percentages directly in the NEO interface.<br><br> Motor channel says On-AR-Off (Must be entered like this with motor switch)<br> Bank Channel says Bank1\/2\/3 - and the percentages are stored there in NEO. (Bank switch must also be active)<br><br> %-e from the sender is not necessary for ESC to ESC.<br>\n<br>\nregards (EN) \/ Gruss (DE) \r<br>\n\r<br>\nRainer Vetter\r<br>\n\r<br>\n_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ \r<br>\nPosting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.\r<br>\n\r<br>\nF\u00fcr Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollst\u00e4ndig abarbeiten. Nehmt Euch Zeit, beantwortet R\u00fcckfragen in Ruhe und vollst\u00e4ndig.\r<br>\n_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ \r<br>\n<i>F\u00fcr Einzelkommunikation bitte <strong>ausschlie\u00dflich Email<\/strong> verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.\r<br>\nFor single user communication please send a <strong>email only<\/strong>! PM, Messenger, Chat etc. won't be read.<\/i>","note":"machine-translated from German"}