{"ok":true,"content":"Hello Andrea,<br><br> What kind of helicopter is the stabilizer on?<br><br> The cause may be vibration during the previous flight, which may have messed up the accelerometers (especially IMZ Z-axis, for up\/down).<br> Then this sensor may become mechanically stuck, and the VBar will issue a warning for safety reasons.<br><br> Your NEO seems to have no backup option (it uses the sensors), but it has Pro, and the &quot;Lightness&quot; parameter might be set there.<br> Please check this: turn the ease setting to zero in all banks and try it.<br><br> However, the message could also be related to the power supply when switching on.<br> If\/when this happens again, please try using a suitable (and charged ;-) ) receiver battery instead of any kind of BEC.<br><br> In the worst case, we would be dealing with a defective sensor, but then the message would not go away.<br><br> The USB cable issue was most likely a coincidence, insofar as the stuck sensor may have come loose in the meantime due to a slight bump or something similar (like a spring, -sproing-).\r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}