{"ok":true,"content":"Hi,<br><br> Okay, after a coffee or so I&#39;ll be ready, could I please see the patient from the ICU again? What, he&#39;s in pathology now?<br><br> :-)<br><br> BTT:<br><br> This is a first-generation NEO. If it uses VLink, the receiver board is mounted piggyback on the mainboard.<br> The connectors (soldered with pins) _could_ be broken, or the conductor track there could be damaged, so that the receiver board no longer has contact.<br> The NEO then blinks red-green, but it is no longer a VLink (as if it were a non-VLink, a receiver or satellite configured), and consequently does not bind.<br><br> Do you happen to have a receiver satellite that you could plug into AUX2\/3?<br><br> If it binds with that, or if, after opening and carefully removing the electronics, the receiver board comes out towards you, or is only hanging by a thread -&gt; bingo.\r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}