{"ok":true,"content":"Hi Ren\u00e9,<br><br> That explains it, even though I&#39;m not familiar with it that way...<br> The transmitter is irrelevant when using the controller; you can turn it however you want... you&#39;re only specifying a status (Off, Idle, On) via the switch.<br> Alternative \u2013 Bypass \u2013 Connect the controller to AUX3, enter the original throttle channel there, and control the throttle from the transmitter. Then use the controller&#39;s internal throttle (heli-governor mode). And ensure that the motor actually shuts off in failsafe mode (test without blades, let it run, turn off the transmitter, or unplug the receiver from the VBar).<br> If you can live with the delay, and the helicopter starts up smoothly, I would leave it as it is.\r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}