{"ok":true,"content":"Hello Rainer,<br><br> Quote: <strong>Hmmm ... I assume that the model is a right-handed rotor and that the tail rotor rotates &quot;upwards to the rear&quot;.<\/strong><br><br><br> Correct :-)<br><br> I&#39;ll take the tail rotor apart to check for hardened grease or defective bearings. Subjectively, the linkage and sliding sleeve look fine. The tail rotor is driven by a rigid linkage; when I hold the tail rotor and turn the rotor head, I can&#39;t detect any slippage. But I already wrecked my Bo-105 with something like this :-(.<br><br> CR - the maneuverability value in my VBC is set to 80 from the Scale L preset. I&#39;ll see if I can get more out of it with the swashplate, but the pitch lever is already a concern, as it tends to &quot;overshoot&quot; with more pitch (as can be seen in the last picture of the swashplate, it&#39;s already at its limit).<br><br> That reminds me, I changed the transmitter from VBCtouch to the EVO and updated everything to the latest firmware, but that can&#39;t be the reason, it just occurred to me. My other helicopters fly perfectly fine with it.<br><br> Thanks so much for your help, Harald.","note":"machine-translated from German"}