{"ok":true,"content":"I&#39;m currently a bit unsure about my scaler setup on the transmitter and the NEO.<br><br> When flying my scaler, I always set the hover position with the stick centered on the transmitter and the expo around the middle to allow for precise altitude control. However, this also means that at higher head speeds, the hover pitch needs to be reduced slightly to ensure the helicopter maintains a consistent altitude.<br><br> If you switch the rotor speeds using flight modes on the transmitter and simultaneously adjust the hover pitch, you can program a time delay of, for example, 2 seconds on the transmitter between flight modes to achieve a smooth transition. This prevents the system rotor speed and pitch adjustment from being abrupt or harsh. I always did it this way; it works perfectly, but I only ever flew with one bank of rotors on the NEO, without switching to additional banks.<br><br> Now I would like to take advantage of the supposed benefits of the NEO&#39;s three benches, and I&#39;m naturally wondering if this even makes sense given my flying habits?<br><br> Secondly, I&#39;m wondering if I can implement bank switching on the NEO with time delays, or will that confuse the NEO?<br><br> Regards, Robert","note":"machine-translated from German"}