{"ok":true,"content":"Brief feedback:<br> I tried out the 156mm Vario tail blades (instead of the 180mm ones). And lo and behold: the tail now moves noticeably more consistently under control and isn&#39;t as jerky as before. I&#39;m happy with the result and I think it&#39;s now the optimal setup. Perhaps a little fine-tuning of the settings is needed, but then it should be perfect.<br><br> What I had forgotten and only remembered because of your post: I had already installed the spiral-toothed pinions in the rear gearbox (Vario tuning accessories), which actually increased the rear wheel speed due to the changed gear ratio.<br><br> Apparently, in my case, the large rear blades, in conjunction with the increased engine speed at the rear, pushed the system to its limits in general (regardless of the Vstabi, as the same effect occurred with the BD Axon).<br><br> Interestingly, there is a note on the homepage regarding the spiral-toothed gearbox (which I believe was not listed two years ago) stating that the tuning gearbox should not be used with larger helicopters (&gt; 2m rotor diameter).<br><br> Best regards<br> G\u00fcnter<br><br><br><br> Edited once. Last edited on 22.07.2023 at 10:34 by sonicgm.","note":"machine-translated from German"}