{"ok":true,"content":"Hello Rainer,<br><br> The Bell 430 weighs 16.3 kg and is equipped with a 4-blade rotor head (Vario) (2300 mm rotor diameter).<br> Vario rotor blades with S-shape, 1015 mm.<br><br> Head speed measured at 920 rpm.<br><br> I calculated a tail rotor gear ratio of 1:4.5 based on the number of teeth (ring gear 63 teeth and bevel gear to the tail rotor 14 teeth), which should result in a tail rotor speed of 4140 rpm. The tail rotor blades are 180 mm long and symmetrical, with a tail rotor diameter of 440 mm.<br><br> Your 156 mm Vario tail blades for the UH are also recommended for the Bell 230, at least in the same scale as my Bell 430. The only difference is the 4-blade rotor head on the 430 (instead of 2-blade on the 230)...<br><br> Thank you and best regards<br> G\u00fcnter","note":"machine-translated from German"}