{"ok":true,"content":"Hello Wolfgang<br><br> -1 is the default setting if a parameter has never been changed.<br> This means the same as 0 \u2013 function off.<br><br> What helps you is the I-discharge (not limit), which slowly discharges the I(integrator), i.e., the heading-hold component or the component that keeps the pirouette speed constant.<br> This can help to achieve a more or less pronounced weathervane effect with scale models.<br><br> I-Limit would limit the maximum permissible heading hold. This can help with scale models that have a weak tail (Fenestrons are examples, but others are too), ensuring the tail rotor is deflected by the gyro to its mechanical load limit. The model is more likely to turn into the wind than to forcefully resist it.<br><br> The cause is probably something else, e.g., instability on the tail potentiometer from the transmitter, or an unequal initialization of the internal sensor and (optional) external sensor (if installed).<br><br> A simple test: change the stick mode on the transmitter so that the tail is controlled by the other stick assembly. Still there, or not?<br> Of course, don&#39;t fly like that ;-)<br><br> \u2014Eddi<br><br> Born to fly ...<br> forced to work.","note":"machine-translated from German"}