{"ok":true,"content":"Hi,<br><br> A few more things to note:<br><br> The reference zero pitch with the swashplate horizontal must be correct (measure to verify, if necessary fold two blades inwards; the tips must touch). The gauge is zeroed at the angle of attack, then adjusted to 8\u00b0 from there.<br> If 90\u00b0 lead time is set (rotor head mechanical, or VBar virtual), you can measure exactly the same way as with a 2-blade rotor.<br> . If virtual rotation is required beyond that, as Rainer writes, or for measuring purposes, temporarily set it back to 90\u00b0.<br> Only measure in setup mode using the designated function; measuring in airplane mode is pointless and will produce incorrect values.<br> The result should be somewhere between 80 and 100 (optimal). Lower values are possible; the helicopter won&#39;t crash, but the control quality will deteriorate, partly because the servos will then be heavily electronically limited and the leverage ratios will be very unfavorable. Higher values could indicate that the linkages are bending excessively; the same principles apply as with very low values.\r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}