{"ok":true,"content":"Hello,<br> I can&#39;t seem to establish a PC connection with my new VBAR Neo.<br> The connection works with Boot Plug and Control Manager.<br> Control Manager outputs the following:<br><br> <i>VBar device found on path: E:\\<br> VBar device connected Serial number: 200****<br> Version: 0.1.20<br> vbar_selftest_v5 -- No Operational Firmware - is up to date<\/i><br><br> Not with the setup tool.<br> Unplug the boot plug, apply power to the stabilizer, then connect the USB. However, nothing happens. No entry appears in Device Manager either.<br> The drivers are installed, but no unrecognized device is displayed.<br><br> I am requesting help,<br> greeting","note":"machine-translated from German"}