{"ok":true,"content":"Hello Rainer,<br><br> I have now performed the following steps:<br> Express version activated, stabilizer connected via bootplug, powered on, same result. The update starts but aborts due to connection issues.<br><br> I quickly set up an old computer and tried it, and lo and behold, the update was successful. Pro version activated =&gt; update successful.<br> In the VBar Neo 6.4 tool, the USB port is green and it shows as initialized and connected. It is also displayed as VBar Neo in the Device Manager.<br><br> So back to my main PC... no connection. The device isn&#39;t even recognized in Device Manager.<br> Back on the old PC, everything works normally.<br><br> So the fault must be somewhere in my main PC; the Neo seems to be fine.<br> As a workaround, I can use the old PC for now, but I would like to run everything through my main PC in the future.<br> Any idea what might be set incorrectly?<br> Many thanks and best regards,<br><br> Andrej","note":"machine-translated from German"}