{"ok":true,"content":"Hello,<br><br> I tried to put my new VBar NEO into operation today.<br> According to the videos, I installed VBar Control Manager and VBar NEO 6.4.<br> Using Bootplug and 4 NiMh cells, I then plugged the whole thing into the USB port.<br> A new Explorer window briefly opens every now and then, containing two files, but closes again after a second.<br> The connection is also repeatedly lost with the VBar Control Manager.<br> I managed to click on applications quickly enough to complete the registration.<br> I was then able to unlock the Pro version online.<br> Since then, the Control Manager only shows me this:<br> &quot;<br> VBar device found on path: D:\\<br> VBar device connected Serial number: 200....<br> Version: 0.0.0<br> Update: (Firmware Pl:363) update ...<br> Update (Firmware) OK<br> VBar device connection disconnected<br> VBar device found on path: D:\\<br> VBar device connected Serial number: 200....<br> Version: 0.0.0<br> Update: (Firmware Pl:363) update ...<br> Update (Firmware) OK<br> VBar device connection disconnected<br> VBar device connected Serial number: 200....<br> Version: 0.0.0<br> Update: (Firmware Pl:363) update ...<br> Update (Firmware) OK<br> VBar device connection disconnected<br> VBar device connected Serial number: 200....<br> Version: 0.0.0<br> Update: (Firmware Pl:363) update ...<br> Update (Firmware) OK<br> VBar device connection disconnected<br> VBar device found on path: D:\\<br> &quot;<br> An Explorer window containing the two files opens and closes sporadically. (And this happens even without the boot plug.)<br> The stabilizer is flashing white continuously.<br> What have I already tried:<br><br> - Different USB cable<br> - Manually update drivers from the installation directory<br> - Alternative power supply with 5 NiMH cells<br> Wiggling the USB port doesn&#39;t help either.<br><br> I suspect the update was aborted due to USB problems, and now there&#39;s no working firmware installed.<br> The only question is, how do I get the USB problems under control? :-\/<br><br> Many thanks and best regards,<br><br> Andrej<br><br> I suspect that the USB problems are the cause.","note":"machine-translated from German"}