{"ok":true,"content":"Hi,<br><br> The &#39;16 model is actually one of the first generation, with the receiver on a separate circuit board. But even that should, of course, be securely mounted in the housing (at least with the servo cables, possibly secured). If in doubt, a new housing wouldn&#39;t break the bank, so I&#39;d probably give it a try.<br><br> GAUI ... are unfortunately (presumably due to the gearbox and the installation position, in carbon-aluminum box construction and with a hard head) not exactly the most delicate, too sensitive sensors.<br> If it works with the standard system, OK, but I would use the rescue status to check over a few flights whether the ball is heading back to the center (or almost) while hovering. Then the rescue would probably be safe, unless something else deteriorates.<br><br> If you know this and can do without the rescue feature on a specific model, you could just install Pro; then you won&#39;t accidentally...<br><br> Or try a different mounting position, or store\/detune it differently (tape-metal plate-tape sandwich, for example).<br><br> During an inspection, we can mainly see if all sensors are measuring correctly (-1 G...0 G...+1 G) and if they are not excessively sensitive.<br> Unfortunately, we can&#39;t do anything\/repair anything if it&#39;s no longer OK :-\/\r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}