{"ok":true,"content":"Thank you!<br> The test was conducted without servos, and sometimes with only one servo connected. The BEC was connected to AUX2 and CH4. AUX3 and CH1 were removed.<br><br> Failsafe again! Once after about 5 minutes, then only after about 15 minutes (even if no battery lasts that long, still bad).<br><br> After several attempts and updating different drivers, I finally got a connection between the PC and the YGE and reduced the voltage to 7.9 volts. Failsafe again! Then I reduced it further to 5.9 volts, just like in the previous attempt with an external battery, but unfortunately, it failed again.<br><br> Now I really don&#39;t know what to do anymore and I&#39;m getting really angry. What a great introduction to electric flying!<br> I think I&#39;ve exhausted all reasonable possibilities. So the controller or the Neo must be faulty, right?<br><br> Greetings","note":"machine-translated from German"}