{"ok":true,"content":"Good morning,<br><br> Well, in my opinion, the VBar does what it&#39;s supposed to do: it monitors the input signal from any receiver, and if no data or corrupted data arrives, it logs packet losses (if individual packets are missing irregularly or are inconsistent and cannot be decoded) outside of synchronization (clock not maintained, like a galley, boom-boom-boom-boom...?) or performs (and logs) a failsafe if the condition persists for longer than 0.6 seconds.<br><br> Green-violet + warm start indicates that a brief power interruption has occurred. This can be easily simulated on the ground by very briefly unplugging and plugging back in the power supply to the VBar (e.g., receiver battery; otherwise, no buffers or similar are needed).<br> This can also trigger all sorts of messages at the same time, because without a stable power supply, anything can happen.<br><br> Motor cables, normally, no. Unless the contacts are exposed and a short circuit could occur, for example, even when the motor beeps when ready (the controller doesn&#39;t have a speaker; the motor makes the sound when it&#39;s activated).<br><br> With Graupner, there is also the peculiarity that the power supply for high-power consumers cannot be looped through the receiver.<br> The transverse connections on the GR16 have less copper than the servo connections; if high currents flow through them, strange things can happen, or something can break.<br><br> We can gladly test the VBar here, independently with Graupner and other external receivers, but my gut feeling tells me (still) that something else is wrong that we might not have found yet.<br> Please create a service case at vstabi.info\/devices and specify all connected components as precisely as possible in the form, especially anything that might not be standard (standard: receiver connected to the VBar with a patch cable, controller with BEC or other power supply, servos, possibly a buffer (everything except the receiver connected to the VBar), done).\r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}