{"ok":true,"content":"The first hover flight is complete. I noticed that the tail drifts very, very slowly to one side. It also oscillates slightly after stopping from a turn. There&#39;s quite a lot you can adjust, it seems.<br><br> Update on the rear drift:<br> I just got back from the airfield and the tail drift problem is fixed. I have a Spektrum DX6i transmitter, where you have to adjust the tail subtrim so that the VBar displays 0 for the stick center position. There are three possible subtrim values for the tail&#39;s zero position in the VBar. The tail subtrim was set to 24; with 25, the VBar still shows 0 for the stick center position, and the tail drift is gone.<br><br> At the club, especially after this incident, I&#39;m hearing yet again that Futaba is significantly more accurate and precise than Spektrum, and that I should first buy a decent transmitter. Some even claim that the same helicopter behaves completely differently when flown with Futaba instead of Spektrum. Can anyone confirm this from their own experience?<br><br> Best regards,<br> Gerhard<br><br><br><br> Edited 7 times. Last edited on 18.08.2013 at 22:13 by <a href=\"mailto:gerhard.kaeb@web.de\">gerhard.kaeb@web.de<\/a> .","note":"machine-translated from German"}