{"ok":true,"content":"Hm...<br> You ran the Kosmik without VGov; I can&#39;t say whether the Graupner and VGov are compatible (no experience).<br> (I once read a review of the Graupner controller and didn&#39;t think it was very good,<br> (But I&#39;m also spoiled by Kosmik and Jive Pro)<br><br><br> You don&#39;t really have much influence on the values if the mechanical setup is correct.<br> - The servo disc-ball joint linkage, centered on the servo deflection and linkage, should then be as perpendicular as possible.<br> - Tail rotor linkage at right angles (this usually also automatically results in a lead of a few degrees on the tail blades, which counteracts the torque)<br><br> I don&#39;t have the helicopter, but the values don&#39;t differ that much for me!<br> They just have to be chosen in such a way that nothing goes wrong!<br><br> wolfgang<br><br><br><br> Edited twice. Last edited on 16\/11\/2016 at 15:32 by ikarus991.","note":"machine-translated from German"}