{"ok":true,"content":"We installed a perfectly flying first-generation TDR with Vstabi in white into a Hughes fuselage from HeliCenterBerlin. A five-blade rotor head from SK (undamped) is now working with fiberglass blades from Stefan Witte. Unfortunately, we can&#39;t get rid of a noticeable &quot;wobble&quot; on pitch and roll. All parameter changes on the setup module have been unsuccessful. Sensitivity, style, agility, etc., have been individually tested from top to bottom, but we can&#39;t get the Hughes to be stable. Otherwise, the flight characteristics are good to very good, depending on the settings.<br><br><br> What else can be done to alleviate the pitch and roll oscillations? Even in the slightest wind, this is noticeable in level flight...<br><br> In my opinion, the helicopter is perfectly adjusted, so I suspect the outdated VBar is the culprit, as it can&#39;t handle the head\/blades.<br><br> Looking forward to your help and wishing you a happy Pentecost!<br><br> Regards, Thorsten Kleyboldt.<br><br> &quot;The only dangerous thing about flying is the Earth.&quot;<br> (Wilbur Wright)<br><br> Bell 230, Hughes MD500D, Sikorsky S-58\/H34, Sikorsky S-51, Piasecki H-21 (under construction)<br><br><br><br> Edited twice. Last edited on 20.05.2018 at 08:27 by Pille.","note":"machine-translated from German"}