{"ok":true,"content":"Yes, the documentation isn&#39;t quite perfect yet; we&#39;re still working on it. We basically have everything we need for VBC, but sometimes the transfer just isn&#39;t that easy.<br><br> Consider the external controller as an additional service that, building upon the motor switch, allows you to output different values to the ESC output. Therefore, when programming the motor switch, you can use this (new) service to program meaningful controller signals from the switch positions (fixed, not adjustable from the transmitter).<br><br> If you don&#39;t want to use this service and prefer to do everything from the transmitter as before, the stabilization unit (SCU) isn&#39;t involved. Therefore, it doesn&#39;t necessarily need to know anything about it.<br> However, knowing the switch positions offers optimization possibilities that I don&#39;t want to withhold from users of external transmitters. Therefore, it&#39;s necessary to somehow get a sense of the operating status, which is achieved via the (virtual) motor switch.<br><br> Just one example: In the case of the AR, the regulation is changed so that rollovers after the AR are prevented much more effectively than before.<br><br> Setting everything up correctly takes some work, but this defines several important enhancements compared to the Mini\/Silverline. This is also one of the reasons why there are no longer any individual analog channels; in the full configuration, you would need to connect eight channels, which isn&#39;t feasible due to space constraints.<br><br> So long... Uli<br> <a href=\"http:\/\/www.vstabi.de\" target=\"_blank\" rel=\"noopener noreferrer\">http:\/\/www.vstabi.de<\/a>","note":"machine-translated from German"}