{"ok":true,"content":"Quote: In the example mentioned with the T8, one must then use a mixer on (gas) channel 3 at switch SF.<br> (ThrottleCut) outputs the value -100, and the other two values for SG Motor?<br><br><br><br> <strong>Throttle Cut<\/strong> - ONLY with Nitro - otherwise it can&#39;t be turned off! - If no Nitro Governor is selected, Throttle Cut isn&#39;t displayed in the PC software either! - By the way, no mixer is assigned; TC must always be active, as it&#39;s the Nitro emergency stop. I only output the switches directly when possible. The Neo handles everything else then ;-)<br><br> Regarding mixing, transmitter flight phases, etc. \u2013 I developed this example using the T8 \u2013 and implemented the functions there as simply as possible (operation is therefore exactly analogous to VBar Control). You can do it differently, of course \u2013 but then you can figure that out for yourselves.<br>\n<br>\nregards (EN) \/ Gruss (DE) \r<br>\n\r<br>\nRainer Vetter\r<br>\n\r<br>\n_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ \r<br>\nPosting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.\r<br>\n\r<br>\nF\u00fcr Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollst\u00e4ndig abarbeiten. Nehmt Euch Zeit, beantwortet R\u00fcckfragen in Ruhe und vollst\u00e4ndig.\r<br>\n_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ \r<br>\n<i>F\u00fcr Einzelkommunikation bitte <strong>ausschlie\u00dflich Email<\/strong> verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.\r<br>\nFor single user communication please send a <strong>email only<\/strong>! PM, Messenger, Chat etc. won't be read.<\/i>","note":"machine-translated from German"}