{"ok":true,"content":"Hi everyone,<br><br> We have two switches (and therefore need two channels), the <strong>motor switch<\/strong><br><br> OFF (clear)<br> IDLE (a single engine speed or throttle value for autorotation training)<br> ON (the speed from bank 1 or 2 or 3).<br><br> and the <strong>bank switch<\/strong> , to which a speed or gas value can be assigned.<br><br> Both switches and their respective channels must be configured so that they can switch between the three states in the display in the PC software.<br><br> What you _can_ do now is, for example, use the gyro channel, which can be switched depending on the flight phase, to fly the banks simultaneously with flight phases and thus D\/R and expo or a different pitch curve.<br><br> _or_<br><br> Use a separate channel for bank switching, and additionally use different D\/R and Expo settings per bank with the flight phases in the transmitter (if at all).<br><br> Savvy?\r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.<br>\n<br>\n<br>\n<br>\n2 mal bearbeitet. Zuletzt am 10.07.2015 10:24 von Eddi E. aus G..","note":"machine-translated from German"}