{"ok":true,"content":"So, over the weekend at the campsite, with only moderate internet access, I set up a NEO with PC software. I&#39;ve owned many VBar units before, but I find the NEO documentation very, very poor. There&#39;s far too little information about the changed concepts. It takes a while to figure it all out... In any case, I was in a pretty bad mood as the proud owner of a new VBar NEO. And if I don&#39;t have a VBarControl, I certainly don&#39;t want to have to search through the VBarControl documentation to find instructions on how to configure my VBar NEO. The information about the controller is also meager. I haven&#39;t yet found a description of the virtual LEDs, even though some parts are self-explanatory. For example, when should the Bailout Armed indicator light come on? On my NEO, it remains dark while I&#39;m working on the workbench, even though Bailout seems to be functioning.<br><br> I see room for improvement on the part of the manufacturer. You shouldn&#39;t have to hunt around in the forum to find basic information.<br><br> Greeting,<br> Bernd<br><br> RV wrote:<br> -------------------------------------------------------<br> Hello Henning,<br> &gt;<br> The functions are essentially in the<br> &gt; Tooltips explained.<br> &gt;<br> In principle, you can also use the VBar Control Apps.<br> &gt; to use as a description for rescue etc. -<br> Because the values are the same. Take a look at that.<br> And if you have any questions: Just ask ;-)<br> &gt;<br> &gt; <a href=\"http:\/\/www.vstabi.info\/de\/node\/1944\" target=\"_blank\" rel=\"noopener noreferrer\">http:\/\/www.vstabi.info\/de\/node\/1944<\/a>","note":"machine-translated from German"}