{"ok":true,"content":"Hello folks,<br> I had my maiden flight with the Neo today on my 700 Rex and a third-party transmitter (14SG). It&#39;s my first VBar, and I was so happy it finally arrived after such a long wait. I installed it and flew it with the first battery. I have to say, the system is really good; the helicopter flies smoothly and responds perfectly to control inputs. Switching to the second bank didn&#39;t affect the RPM, but on bank 3, the ESC (Castle 120) slowly increases the RPM, then drops back down until the system settles into a stable speed. After that, it&#39;s constant and steady.<br> I also tested the rescue function and I must say it worked flawlessly and reliably every time. I&#39;m thrilled!<br><br> With the second battery, and the feeling of a great FBL system and the rescue function, I flew a bit more daringly and crashed it into the field with full force. It all happened so fast, and I asked myself: Did you pull the rescue spool?! Why not?!<br><br> At this point, I would like to reiterate the tip I&#39;ve already mentioned several times to all newcomers to the rescue function: Practice and train the rescue button!<br> Otherwise, you&#39;ll end up like me. You buy the rescue system to prevent the helicopter from crashing in an emergency, and then you forget you even have it!<br><br> Best regards<br> M.","note":"machine-translated from German"}