{"ok":true,"content":"Hi Christian,<br><br> Then only the connection between receiver and VBar remains.<br> It logs that input signals are missing, and if this happens long enough, it goes into fail safe mode and turns off the motor.<br> The fact that it happened again the first time suggests an insecure connection, not that it was completely unplugged.<br><br> Can you still get the mechanism working? Maybe try wiggling the cables or doing a range test (just to be sure)?<br><br> How was it wired? With the included patch cable? An old one? A different one?<br> How long was the cable between the receiver and the VBar when a different cable was used?<br> Where exactly was the receiver installed on the Goblin, and where exactly was the NEO?<br><br> If you can take more pictures, send them my way.<br><br> For an investigation into an aircraft accident, every little detail is important.<br><br> We should definitely take a look at the VBar and I would also have the receiver checked, don&#39;t risk anything.<br> It doesn&#39;t necessarily have to have been a reception failure. We also don&#39;t want to categorically rule out the VBar (Virtual Station).\r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}