{"ok":true,"content":"Hi everyone,<br><br> The following condition.<br> The T8 transmitter was set up exactly as in the example on the VBar Info page.<br> The S-Bus was wired to the NEO. The Castle ESC is plugged into the NEO&#39;s ESC port.<br> The software was configured as described. However, the controller is not responding.<br><br> Normally, the controller beeps 12 times (when power is applied), for 12S batteries, and then there is another short beep.<br> Initialization signal. However, this signal does not sound.<br><br> However, if I plug the controller into the GAS channel of the S-Bus receiver, then everything works perfectly.<br><br> However, I would like to understand why it doesn&#39;t work when the controller is plugged into the NEO.<br> In the software, all bars move as they should when controlling the transmitter.<br> However, the controller isn&#39;t producing any sugar; at least, it&#39;s not receiving a signal to initialize.<br><br> Can someone please help me? What am I doing wrong?<br><br> Thank you so much in advance for your help.","note":"machine-translated from German"}