{"ok":true,"content":"Hello everyone,<br><br> Today, together with a colleague who has an MC32, I set up a...<br> Heli with Neo set up.<br><br> Set up via VBC:<br><br> Channels as follows:<br><br> 1 - Pitch<br> 2 - Rear<br> 3 - Nick<br> 4 - Roll<br> 5 - Bank switch<br> 7 - Engine<br> 8 - Rescue<br><br> The direction of rotation had to be changed in the transmitter for roll and tail.<br> Channel 6 is specifically assigned to the motor in Graupner systems; we could have used that, but we have now defined a separate channel for it.<br><br> A two-way button was used during the rescue. The paths had to be set as follows (see also screenshot).<br> Neutral position: 0%<br> Button pulled: -100%<br><br> Too much wind to fly today, maybe tomorrow.<br><br> If you have any questions, please feel free to ask.<br><br> Stephan<br><br> File attachments:<br> <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19565,filename=00024_GOB500.bmp\" target=\"_blank\" rel=\"noopener noreferrer\">Open<\/a> | <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19565,filename=00024_GOB500.bmp,download=1\" target=\"_blank\" rel=\"noopener noreferrer\">Download<\/a> - 00024_GOB500.bmp (65.1 KB)<br> <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19566,filename=00025_GOB500.bmp\" target=\"_blank\" rel=\"noopener noreferrer\">Open<\/a> | <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19566,filename=00025_GOB500.bmp,download=1\" target=\"_blank\" rel=\"noopener noreferrer\">Download<\/a> - 00025_GOB500.bmp (65.1 KB)<br>\n                    \n                ","note":"machine-translated from German"}