{"ok":true,"content":"Hi everyone,<br> Thanks for that, I&#39;ll test it right away.<br><br> I had some difficulty understanding the individual states of the Rescue function and the Governor in English, as different translations are used in different places; you should perhaps adjust that.<br><br> Example Governor:<br> Under Switches Live you&#39;ll find Stop, Idle and Run.<br> Under External Governor on the main screen, the settings Autorotation (for the idle value) and Throttle out (for the run value) are available.<br> However, the NEO log then shows &quot;Motor Switch operated to off (Stop) and Motor Switch operated to Idle Bailout&quot;<br><br> Example Rescue:<br> Under Switches Live, Rescue is represented as follows:<br> Active, Off and Level<br> In Setup &gt; Swash &gt; Expert, you will find Rescue only, Beginner Only and Rescue and Beginner for Rescue Mode.<br> The tool tips for Rescue state, &quot;Rescue will turn the heli skids down and level is as well as climb...&quot; and &quot;Beginner will limit the tilt angle on aileron and...&quot;. Therefore, I initially thought Level was the Rescue mode, but the thing didn&#39;t pitch upwards.<br> For this, the zero value for Off is important in order to activate everything in the first place....<br><br> This confused me a bit, but after some testing I now understand it :-) I needed some time and read several forum threads, especially for the rescue function and the &quot;OFF&quot; position at servo center, which reactivates the rescue.<br><br> Let&#39;s see how it is in the original German version :-)<br> The advantage is that once you understand it, you won&#39;t forget it :-)<br><br> greeting<br> Torsten","note":"machine-translated from German"}