{"ok":true,"content":"I don&#39;t remember why I steered the helicopter into the field. Probably a blackout or a sudden drop in altitude when inverted to normal position.<br><br> The voltage warning 3 seconds before impact is still puzzling me. Did the servos draw so much current during the rescue that the Jive 80HV BEC experienced a voltage drop? Or does the Jive BEC have problems when the motor (the main power consumer) is off? The Graupner log with the uniSens-E sensor shows the BEC voltage dropping from 5.6V to 5.0V approximately 1.5 seconds before impact.<br> I don&#39;t have a backup battery and I&#39;m using standard servos from the Logo 600 (Sav\u00f6x).","note":"machine-translated from German"}