{"ok":true,"content":"Good evening,<br> I&#39;ve been stuck on an unbelievable problem since noon today... I received the Neo today and immediately bought the Rescue Pro package after registering.<br> I downloaded and installed VbarControl and copied the key into the directory.<br> Then I was able to connect the stabilizer via the control unit and upgrade to the Rescue Pro version. Everything&#39;s fine.<br> Then I started the NEO software and reset the stabilizer. No connection. Tried several times, still doesn&#39;t work.<br> At first I thought, &quot;Ah, maybe the key hasn&#39;t been updated to the Rescue version yet.&quot; So I switched back to the Express version, tried it, but nothing changed. Then I noticed that the stabilizer is recognized in the Control Panel under both &quot;Portable Devices&quot; as VBOOT and under USB as a mass storage device. This is different from the example driver installation video I watched in the meantime. Unfortunately, according to Windows, both devices are working perfectly, and I can&#39;t select any other drivers.<br> Eventually, the confirmation came: &quot;Dear customer, your VBar NEO has been equipped with a rescue function.&quot;<br> At first I thought, okay, maybe this is the current key, downloaded it, tested it, nothing, neither in the Express nor in the latest Rescue Pro firmware.<br> I repeated the entire process with my laptop... I can access all update options via VBarControl, flash the device, etc., but the configuration software simply refuses to connect...<br> I hope someone here can help me. After trying for 7 hours, I&#39;m just at my wit&#39;s end :-)<br><br> Greetings<br> Christian","note":"machine-translated from German"}