{"ok":true,"content":"Hello,<br><br> Today I finally had the pleasure of testing the rescue function with my Logo 600sx.<br><br> It performs well in all situations and provides additional security, especially if you&#39;re feeling a little nervous, for whatever reason.<br><br> But then I flipped the helicopter onto its back 50m above the ground and gave it a good amount of positive pitch. It then accelerated towards the field. :-)<br> Then the reserve was deployed. Neo then moved the helicopter to neutral using roll and pitch (perhaps also a little negative pitch, but not enough to slow the descent) and then sluggishly applied positive pitch. So, towards the end of the reserve, I had to significantly overcompensate with positive pitch and was able to save the helicopter from impact, keeping it 20cm above the ground.<br> Had I pulled the rescue stick from, say, 5 meters high, then he would have crashed into the field during the roll and pitch rotation!<br><br> The rescue pitch was set to 62 (default value) in the TS menu, and the engine speed was only 1650 RPM. I have now increased the rescue pitch to 100. However, I did not repeat the test.<br><br> Are there any other parameters that can improve the helicopter&#39;s ability to recover during dynamic maneuvers close to the ground?<br><br> Greetings,<br> Stefan<br><br><br><br> Edited once. Last edited on 26.07.2015 at 19:55 by stefan_heli.","note":"machine-translated from German"}