{"ok":true,"content":"Gyrofreak wrote:<br> -------------------------------------------------------<br> Unfortunately, my engine still won&#39;t start.<br><br> What does the controller do?<br> Nothing at all, no flashing lights, no honking, ... :-)<br><br> I think you have a similar problem to mine.<br><br> Try this:<br> - Master at ESC<br> - Slave to AUX2 or AUX3<br> - Set Setup Menu Control II Pitch to Throttle<br> - then pitch fully negative.<br> - Pull the jumper on the controller (even if it is not initialized) and wait to see if it enters programming mode.<br><br> ...see you later<br> Hartmut<br><br> ______________________<br> If you don&#39;t like it, fight it!","note":"machine-translated from German"}