{"ok":true,"content":"Hello<br><br> I installed the Neo Express 6.1 in my Logo 600 yesterday and I can&#39;t get the motor to run.<br> The slave cable from the Kontronik must be connected to the ESC; otherwise, the controller won&#39;t initialize at all. I&#39;ve tried connecting the master to AUX-1, AUX-2, and AUX-3 \u2013 the motor still won&#39;t start. I&#39;ve changed the motor channel assignment in the software from 7 to 1 and changed the bank switching from 1 to channel 7 (like on my other helicopters that still run 5.3).<br><br> AUX-2 switch on the right for bank switching and the small switch to the right of it, Aileron D\/R, for motor start.<br><br> After several hours of switching things around and trying, I&#39;m at my wit&#39;s end - please help - thank you very much.<br><br><br> Greetings<br> Stefan","note":"machine-translated from German"}