{"ok":true,"content":"Here I am again with a few more thoughts...<br><br> Reading the log, he says:<br> I accidentally hit the rescue button while switching banks, got scared, and pulled the throttle hold.<br> (I&#39;ve never rearranged the bench while flying upside down)<br><br> Then I turned the engine off and quickly turned it back on.<br> (Turning off the engine requires me to use a switch that is not directly accessible via the finger arrangement on my remote control)<br> Furthermore, the log states that the helicopter crashed with its engine running and the rescue operation was active.<br> This is definitely not the case. The engine was off. Otherwise, the minimal damage wouldn&#39;t make sense.<br><br> Question at this point:<br> Can I deduce from the log that the switches were moved exactly in the order shown, or is it possible that the log entries are mixed up if the changes were made in quick succession?<br><br> The motor switching off at the end is correct again. I probably accidentally tripped the motor safety switch.","note":"machine-translated from German"}