{"ok":true,"content":"Good evening<br><br><br> I went for a short flight today and the helicopter&#39;s behavior is much better now :-)<br> I made the following changes:<br><br> a) <strong>Increased RPM only<\/strong> -&gt; helicopter more responsive, much more stable during rescues (actually perfect) and ... !!!<br> The vertical tail oscillation occurs much later :-)<br> That means I have to come in pretty quickly, give it full pitch, and then add quite a bit of nick as well.<br> Only then does this unpleasant behavior occur.<br><br> The downside is that I now have to fly at higher RPMs with a relatively normal pitch range, resulting in a shorter flight time.<br> The effect is still somewhat present. Okay, who flies into a loop like that? ;-)<br><br> b) Further reducing the TS sensitivity did not bring about any improvement.<br><br><br> What actually happens physically when I fly at full speed, full pitch, and high pitch?<br> The rear end would have to generate a significant counter-torque. Could it be that the rear belt is skipping?<br><br><br> Does anyone have any further ideas for optimization?<br> Thank you so much for your time and ideas. :-)<br><br><br> Greetings Urs","note":"machine-translated from German"}