{"ok":true,"content":"Hi Lars<br><br><br> a)<br> Yesterday I tried DJBlue&#39;s tip and reduced the I-component of the TS from 60 to 50.<br> Subjectively, it&#39;s more of a deterioration.<br> The effect of the vertical tail pendulum already occurs at high forward speed when applying medium pitch.<br><br> b)<br> I have something else to say about the setup and the helicopter:<br> The helicopter has the Hobbywing 100A V3 ESC. I&#39;m using the Hobbywing&#39;s internal ESC. The blades are currently from ZEAL.<br><br> I previously had VBAR Mini suspension installed with original SAB blades. I hadn&#39;t noticed this behavior before.<br> Unfortunately, I also had a helicopter tip over on the ground about three weeks ago. The blade shaft, a swashplate servo, and the main rotor blades were damaged. Since then, I&#39;ve been using ZEAL blades. One swashplate servo is new (same type).<br> The tail of the helicopter did have one or two minor damages, which I do not consider critical in terms of stiffness.<br> The VBAR frequency analysis without leaves shows no unusual spikes.<br><br> I&#39;ve never had any problems adjusting the VBAR before. Could it be a mechanical issue?<br><br><br> Thank you so much for your tips!<br><br> Greeting<br> Urs","note":"machine-translated from German"}