{"ok":true,"content":"Esteemed Forum<br><br><br> I&#39;m using a Goblin 370 with the matching BK servos and the VBAR NEO with rescue function at medium RPM. I&#39;m generally very impressed with the NEO. My transmitter is a Futaba. The rescue function works perfectly.<br> The helicopter performs perfectly with tic-tocs, rainbows, piroflips, strong pitch maneuvers, etc. :-)<br> I&#39;m happy.<br><br> However, I cannot eliminate the following minor effect:<br><br> <strong>-If I am flying around and activate the rescue function, it can happen that the tail swings vertically for a short time.<br><br> I observe a similar vertical tail oscillation when, at full speed and full pitch, I control the helicopter by tilting it into a<br> Looping force<br> (Of course, you don&#39;t fly into a loop at full pitch...). Suddenly, the tail begins to oscillate strongly and continuously in a vertical direction.<br> When I reduce the pitch, the tail stabilizes immediately.<\/strong><br><br><br> I tried reducing the rear gain by 5% and then by 10%. Unfortunately, without success.<br><br><br><br> Does anyone have any ideas on how to eliminate this oscillation?<br><br><br> Thank you<br> Urs","note":"machine-translated from German"}