{"ok":true,"content":"Hi,<br><br> The NEO is fundamentally suitable; however, appropriate ground tests would need to be conducted where the turbine runs through its operating speeds to see if it affects the NEO in any way. This is not expected, as the operating range of the sensors is now far outside practically all vibration spectra on a model helicopter, but better safe than sorry, especially with a model like this.<br><br> The NEO should of course go inside the fuselage, not on top of the mechanics.<br><br> With VBar Control, you could even create receiver redundancy by connecting two NEOs via Interbus. And you&#39;d gain a few more servo connections for special functions, if needed.<br><br> Scale software ... is practically history: we now have the parameter Heli size, which is a free setting parameter that covers both the XXtreme and the Scale (mainly adjusting the time constants for the control, depending on the mass\/inertia of the model).\r<br>\n\r<br>\nGr\u00fc\u00dfle\r<br>\n\r<br>\nEddi<br>\n<br>\nBorn to fly ...\r<br>\nforced to work.","note":"machine-translated from German"}