{"ok":true,"content":"After the motor replacement, it worked flawlessly for 18 flights, but this morning the NEO suddenly cut out without any real load. The log shows that the motor was switched off, which definitely wasn&#39;t the case. The helicopter was always controllable, so there was no signal loss. I was only about 20 meters away when it happened. I&#39;ve marked the spot.<br> Other helicopters with different FBL systems work without problems with the DX8; only the NEO causes these problems.<br> Can anyone make sense of this?<br><br> OK 0:00 Reset Reason: Power On<br> Info 0:05 Calibration Finished<br> OK 0:15 Good Health Message (10sec)<br> OK 0:25 Good Health Message (10sec)<br> Info 0:35 Motor Switch operated to Idle bailout<br> Info 0:37 Governor Mode Pitch<br> Info 0:37 Motor Switch operated to ON<br> OK 0:47 Good Health Message (10sec)<br> OK 0:57 Good Health Message (10sec)<br> OK 1:07 Good Health Message (10sec)<br> Info 1:11 Bank 2 Loaded<br> OK 1:21 Good Health Message (10sec)<br> OK 1:31 Good Health Message (10sec)<br> Info 1:41 Raised Vibration Level<br> OK 1:51 Good Health Message (10sec)<br> Info 1:59 Raised Vibration Level<br> OK 2:09 Good Health Message (10sec)<br> Info 2:18 Governor Mode Stop<br> Info 2:18 Governor Mode Pitch<br> Info 2:18 Motor Switch operated to Idle bailout<br> Info 2:18 Motor Switch operated to ON<br> Info 2:19 Bank 1 Loaded<br> Info 2:19 Bank 2 Loaded<br> Info 2:20 Governor OFF<br> Info 2:20 Governor Mode Pitch<br> Info 2:20 Motor Switch operated to OFF<br> Info 2:20 Motor Switch operated to ON<br> Info 2:26 Raised Vibration Level<br> OK 2:36 Good Health Message (10sec)<br> Info 2:38 Bank 1 Loaded<br> OK 2:48 Good Health Message (10sec)<br> OK 2:58 Good Health Message (10sec)<br><br> File attachments:<br> <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19980,filename=log-20000383-Sep-15--2015-8-38-40-AM_.vbr\" target=\"_blank\" rel=\"noopener noreferrer\">Open<\/a> | <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19980,filename=log-20000383-Sep-15--2015-8-38-40-AM_.vbr,download=1\" target=\"_blank\" rel=\"noopener noreferrer\">Download<\/a> - log-20000383-Sep-15--2015-8-38-40-AM .vbr (16.7 KB)<br>\n                    \n                ","note":"machine-translated from German"}