{"ok":true,"content":"Hi,<br> The channel is activated via a two-position button. It cleanly switches from 0 (unactivated) to -100 (activated). I also use this button on other rescue systems with BD-3SX without constantly triggering rescues. I think I can rule that out.<br> Spektrum has a model match, so I can rule out that it&#39;s the wrong model.<br> The channel assignment is also correct; I&#39;ve already made 75 flights like this. The software also displays all switch positions correctly.<br><br> The motor has now logged 210 flights and has been trouble-free so far. The NEO is connected to the controller via an RPM sensor; could this trigger the bailout?<br> What can be observed is that the engine speed drops from 1900 to 1100 rpm when the problem occurs - which I would attribute to the regulation of the NEO.<br><br> I experienced a similar drop in engine speed a few flights ago, but no bailout was triggered then.<br><br> Despite all the rescues, the helicopter was controllable via roll, pitch and yaw, except that the rescues constantly triggered pitch inputs which could not be completely overridden even by full negative pitch.<br><br> I&#39;ll test it tonight without leaves to see if the problem can be reproduced.<br><br> Regards,<br> Hermann","note":"machine-translated from German"}