{"ok":true,"content":"I have the following problem<br><br> I&#39;m currently practicing pyro flips and always do half pyro flips:<br><br> 1\/2 turn forward<br> 1\/2 turn rear right<br> 1\/2 turn forward etc. etc.<br><br><br> But if I do it a little faster, the rear end swings out.<br><br><br> I experienced this at around 1500-2200 RPM; it doesn&#39;t happen at full RPM.<br><br> Here are my current<br> Values in Neo Stabili Neo<br><br> Sensitivity rear 85<br><br> Acceleration 55<br> P share 80<br> I share 90<br> D share 0<br> Expo 50<br> DMA pitch 70<br> DMA cyclic 8<br><br> Stop gain 50 50<br> Rear optimization 57 to 10<br><br> Savox servos, but strong enough, I can&#39;t think of which ones right now.<br> The controller is a 120 Jive KSA mode<br> Engine of the original Quantum<br><br><br> I didn&#39;t pay attention to which direction the rear end turned ;\/<br><br> Does anyone have any ideas before I keep trying to adjust something...?<br><br> Greetings","note":"machine-translated from German"}