{"ok":true,"content":"Hello,<br><br> Brief update on the &quot;wobble problem&quot;:<br> By reducing the I-component from 60 to 50, I was able to completely eliminate the wobbling at medium (approx. 1920 rpm) and high (approx. 2100 rpm) speeds.<br><br> At low speeds (approx. 1680 rpm), a very slight wobble is still noticeable. I will test whether reducing the integral (I) value to approximately 48 or 47 brings any improvement, and I will also try different torque sensitivity settings.<br><br> Apart from this last, minor &quot;blemish&quot;, the helicopter now flies really TOPPPPP - and especially the tail is an absolute dream (I increased the stop gain from 20 to 24 and also increased the tail I-share by 10 points, the DMA share pitch is between 19 and 24 depending on the RPM, and I reduced the cyclic DMA share to 2).<br><br> vg,<br> Tom.","note":"machine-translated from German"}