{"ok":true,"content":"Hello,<br><br> I have the following problem with my Goblin 700 and the Neo (in the Pro version), which I can&#39;t really get a handle on.<br><br> The helicopter flies perfectly \u2013 it does exactly what it&#39;s supposed to do ;-)<br> The wheels roll like a dream, the 3D figures work really well, and the rear end is absolutely top-notch.<br><br> If only there wasn&#39;t one small but:<br> If I let the helicopter hover and then give a very short control input on roll or pitch (so that the helicopter moves about 20-30\u00b0 on the respective axis) and then immediately return the stick to the center position, the helicopter has a classic wobble or rocking motion on roll or pitch.<br> Initially, I had the optional 0.2mm shims installed on the rotor head \u2013 I have since removed them. This noticeably reduced the wobble (especially at high speeds), but the wobble is still clearly present at low speeds.<br><br> First of all: the helicopter is absolutely top-notch in its construction, all cables are neatly laid, the cables on the Neo are also free of tension and run straight, there are no strange noises or any other abnormalities.<br><br> I&#39;m attaching the current setup files (Bank 1 - 3) as well as the log file.<br><br> For the sake of completeness, here is the entire setup:<br> Goblin 700 Yellow Carbon Edition \/\/ Kosmik 200 + Pyro 800 \/\/ Neo Pro \/\/ 3x BK 8002 and 1x Futaba BLS 276SV @ 8V from the Kosmik - supported with Linus buffer capacitors (50F) \/\/ Railblades 696 + SAB 115 +\/- 13\u00b0 Pitch \/\/ Futaba SBus receiver \/\/ RPMs: Bank 1 at 1700 RPM \/ Bank 2 at 1920 RPM \/ Bank 3 at 2100 RPM<br><br> Flying style: dynamic aerobatics as well as normal 3D.<br><br> I hope you can help me - apart from this wobbling while hovering, the helicopter and the Neo fly really well.<br><br> Thanks &amp; best regards,<br> Tom.<br><br> One more note:<br> When saving the setup to a file using the current PC software, no file extension is appended. Therefore, I manually added .vbr.<br> The log file is created with the .log extension, but it cannot be uploaded here in the forum due to this .log extension. Therefore, it also uses the .vbr extension. File attachments:<br> <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19826,filename=Bank1.vbr\" target=\"_blank\" rel=\"noopener noreferrer\">Open<\/a> | <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19826,filename=Bank1.vbr,download=1\" target=\"_blank\" rel=\"noopener noreferrer\">Download<\/a> - Bank1.vbr (2.3 KB)<br> <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19827,filename=Bank2.vbr\" target=\"_blank\" rel=\"noopener noreferrer\">Open<\/a> | <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19827,filename=Bank2.vbr,download=1\" target=\"_blank\" rel=\"noopener noreferrer\">Download<\/a> - Bank2.vbr (2.3 KB)<br> <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19828,filename=Bank3.vbr\" target=\"_blank\" rel=\"noopener noreferrer\">Open<\/a> | <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19828,filename=Bank3.vbr,download=1\" target=\"_blank\" rel=\"noopener noreferrer\">Download<\/a> - Bank3.vbr (2.3 KB)<br> <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19829,filename=log-20001107-29-08-2015-17-58-11.vbr\" target=\"_blank\" rel=\"noopener noreferrer\">Open<\/a> | <a href=\"https:\/\/www.vstabi.info\/forum\/file.php?53,file=19829,filename=log-20001107-29-08-2015-17-58-11.vbr,download=1\" target=\"_blank\" rel=\"noopener noreferrer\">Download<\/a> - log-20001107-29-08-2015-17-58-11.vbr (2.9 KB)<br>\n                    \n                ","note":"machine-translated from German"}