mahbouni
1 September 2016 23:2501.09.2016 23:25
Wann werden das Gegenlager und die Platte für 8-mm-Motorwellen verfügbar sein?
When will the counterbearing and plate for 8mm motor shafts be available?
Eddi E. aus G.
2 September 2016 08:2902.09.2016 08:29
Hi,
no specific date yet. If required like 'now', you could also press out the current bearing and set in a suitable bearing with 8 mm inner diameter.
Kind regards
Eddi
Born to fly ...
forced to work.
mahbouni
2 September 2016 08:3402.09.2016 08:34
Verstehe, die Platte ist also gleich und nur das Lager ist anders. Welchen Außendurchmesser und welche Breite hat das Standardlager?
I see, so the plate is the same and only the bearing is different. What is the outer diameter and width of the stock bearing?
Eddi E. aus G.
2 September 2016 09:4002.09.2016 09:40
Hi again,
the required bearing would be 8x15x5 mm. I can not yet tell if the plate will be the same in the future, but from a modellers point of view, it's doable.
Mind that 8 mm pinions are only available for the larger main gear from the 700 XXtreme, which also requires the one way for the larger main gear.
This affects the looks of the 700 and adds weight.
Kind regards
Eddi
Born to fly ...
forced to work.
mahbouni
2 September 2016 10:0602.09.2016 10:06
Ich besitze einen Pyro 750 Motor, aber die Welle ist zu kurz. Ich muss noch einige Wochen warten, bis Kontronik die längere Welle herausbringt. Um schneller fliegen zu können, hatte ich vor, den Pyro 800-48 Motor und das Hauptzahnrad von meinem 700xx auszuleihen.
Ich habe bei lokalen Lagerspezialisten in Großbritannien nach Lagern der Größe 8x15x5 mm gesucht und nichts gefunden. Es gibt viele Lager mit 14 mm und 16 mm Außendurchmesser, aber keine mit 15 mm.
Kann ich nicht die Platte von meiner 700xx verwenden?
I have a Pyro 750 motor but the shaft is too short. I have to wait some more weeks for Kontronik to release their longer shaft. To get flying sooner I planned to borrow the Pyro 800-48 motor and main gear from my 700xx.
I just searched local bearing specialists in the UK for 8x15x5mm and can not find anything. Lots of 14mm and 16mm OD but not 15mm.
Can I not use the plate from my 700xx?
Eddi E. aus G.
2 September 2016 10:2802.09.2016 10:28
Hi,
no, the old parts won't fit. Plus, the counter bearing is now connected to the motor plate.
If I google the bearing size, I get lots, even on ebay.
Kind regards
Eddi
Born to fly ...
forced to work.
mahbouni
2 September 2016 11:0202.09.2016 11:02
Bugcatcher
14 September 2016 14:4214.09.2016 14:42
8x15x5 ist keine gängige Größe, aber es gibt sie noch. Es ist nur schwierig, ein qualitativ hochwertiges Lager zu finden und nicht ein billiges chinesisches.
8x15x5 is not a common size but there are some available. Just hard finding a quality bearing instead of a cheap Chinese one.
mahbouni
14 September 2016 14:5214.09.2016 14:52
Genau. Die einzigen brauchbaren Teile, die ich finden konnte, waren aus dem Ausland, und die Kosten inklusive Versand waren unverschämt. Ich habe mir dann hier vor Ort eine EZO 8x16x5 gekauft und einen Freund gebeten, das Gegenlager auszufräsen. Er stellt beruflich Formel-1-Teile her.
Einmal bearbeitet. Letzte Bearbeitung am 14.09.2016 um 14:53 Uhr von mahbouni.
Exactly. The only quality ones I could find were in other countries and the cost with shipping was silly. I bought an EZO 8x16x5 locally and got my friend to mill out the counterbearing. He makes F1 car parts for a living.
Edited 1 time(s). Last edit at 09/14/2016 02:53PM by mahbouni.
Fasster
16 September 2016 14:2816.09.2016 14:28
Ich habe diese bei Boca für meinen Pyro 850 Comp bestellt.
http://www.bocabearings.com/bearing-inventory/Radial-Bearings/18281/8x15x5-MR158ZZPS2 Einmal bearbeitet. Letzte Bearbeitung am 16.09.2016 um 14:32 Uhr von Faster.
I ordered these from Boca for my Pyro 850 Comp
http://www.bocabearings.com/bearing-inventory/Radial-Bearings/18281/8x15x5-MR158ZZPS2
Edited 1 time(s). Last edit at 09/16/2016 02:32PM by Fasster.
krtek2k
23 September 2016 13:1823.09.2016 13:18
Suchen Sie einfach nach einer Metallverarbeitungsfirma in Ihrer Nähe, die kann Ihnen eine Welle nach Ihren Wünschen zu einem ähnlichen Preis wie bei Kontronik anfertigen :-).
Motorwellen sind nichts Kompliziertes.
Just find around some metalworking company, they can do shaft like you want for similar price like kontronik prices :-)
Motor shafts are nothing complicated.
mahbouni
23 September 2016 13:2623.09.2016 13:26
Gut zu wissen für die Zukunft. Meine gefräste Platte mit 8x16x5-Lager funktioniert einwandfrei. Ich denke, ich spare mir das Geld und verwende weiterhin meinen Pyro 800-48.
Good to know for future reference. My milled out plate with 8x16x5 bearing is working like a charm. I think I'll save my money and continue using my Pyro 800-48